Water Damage Restoration – A Brief Preview

It’s the method of repairing a house or property to its pre loss condition. Injury to the property could possibly be as a result of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization on the basis of the water contamination levels, decontaminating and drying the structure, monitoring of the method and completion of the process. You can find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage because of water guide is the benchmark tool that is utilized by companies that specialize in restoration of water damage.
water damage cleanup Des Moines, IA

Loss Assessment and Categorization

Loss evaluation is the first and the most important part of water damage restoration. The assessment has to be correct so that the appropriate response may be taken. In restorating the damage brought on by water, technicians and the insurance companies must interact and understand what is damaged and just how to start restoring the damage. Identifying the origin of the damage, documentation of damage, and accurate estimates are mandatory for a suitable water damage restoration. Categorization is on the basis of the contamination degrees of the water source. The categories are listed below

Category 1 – This is water from clean sources like pipes, sinks and toilets without faeces or urine.

Category 2 – This is water that has some contaminants like water from a dishwasher, automatic washer or toilet with urine.

Category 3 – This is water that is highly unsanitary and is effective at causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.

Decontamination and Drying

Following the evaluation is complete, the method of drying and decontaminating begins at the site. On the basis of the extent of damage, damage caused because of water may be classified into 4 types. Class 1 Damage- When loss is fixed to a tiny area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – When the damage is to the whole room and carpet area. Class 3 Damage – When the whole area is saturated with water and Class 4 Damage – when there are many deep saturation pockets. Decontamination and drying is a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination has to be performed if contamination has been detected in the area. Decontamination may be performed for the entire area or in specific pockets where contamination has been detected.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top